封装:
U 型架(6)
开放式(4)
(2)
封闭(1)
M-02(1)
多选
包装:
(2)
Bulk(7)
(5)
多选
型号/品牌/封装
品类/描述
库存
价格(含税)
资料
  • 品类: 开关电源
    描述: MPU150 系列 MPU150 系列电源设计用于满足 1U 高度限制。 它们含有功率因数校正 (PFC),带薄型封装、高速数字电路和 Power-One 的独特双转换器体系结构,提供高可靠性和出色调节。 这些多输出型号在输出 V1 和 V2 上具有远程感应,可为输出电缆损耗提供独立补偿。 输入 V1 和 V2 上的远程感应 过温、过载和过压保护 提供公制或 SAE 配件 340,000 小时以上 ### 认可 EN61000-3-2 ### 开关模式 - Power One
    5743
    1+
    2793.9450
    10+
    2768.5455
    25+
    2755.8458
    50+
    2743.1460
    100+
    2730.4463
    150+
    2717.7465
    250+
    2705.0468
    500+
    2692.3470
  • 品类: 开关电源
    描述: 50 W 单/双输出,M 系列 M 系列直流 - 直流和交流 - 直流转换器代表广泛且灵活的电源范围,用于高级工业电子系统。 这种欧洲盒式电源由于每个输出具有单独的调节,因此具有高效率、可靠性、低输出电压噪声和对负载/线路变化的出色动态响应功能。 LED 指示器显示该转换器的状态,并允许随时对系统进行可视监控。 盒式设计,允许在大气环境温度高达 71°C 时,以额定负载运行。 如果提供强制冷却,则环境温度可以超过 71°C,但所有情况下外壳温度应保持低于 95°C。 当外壳温度 TC 超过限制时,温度传感器将生成抑制信号,该信号会终止输出。 温度降至限制以下时,输出将自动恢复。 根据 IEC 60927-3,转换器可插入 19 英寸的子架系统,或安装到地盘或板子上。 工作输入电压范围极广,8 至 385 V 直流和 85 至 264 V 交流,47 至 440 Hz 符合 RoHS 无铅焊接 I 类设备 输入过压和欠压闭锁 1、2 或 3 单独隔离,控制输出高达 96 V 输出:SELV,空载、过载、短路保护,矩形电流限制特性 可使用远程开/关调节输出电压 抗干扰性符合 IEC/EN 61000-4-2、-3、-4、-5、-6-6 辐射符合 EN 55011/55022 所有印刷电路板均有保护漆涂层 超高可靠性 提供电池充电器型号 ### 标准 EN 60950-1, UL 60950-1 铁路 EN 50155,EN 50121
    1541
  • 品类: 开关电源
    描述: 600W to 1000W, Universal Input, Rack Mount Front Ends Front End power supplies with digital control IC interface for status monitoring, power supply enable and fan speed control 1U or 2U height configurations (orientation dependant) High power density design Highly efficient topology 12V/0.5A standby output Power factor correction to EN 61000-3-2 EMC meets EN 55022/CISPR 22 Class B (conducted) and Class A (radiated) Over-current, over-voltage and over-temperature protection Supervisory signalling Droop current share with ORing FETs Internal fan cooling Status LEDs 3 pin IEC320 input connector For GUI software refer to www.power-one.com & enter "FNP" in the site search ### 认可 TUV, CSA, UL recognised ### 标准 EN 60950-1, UL 60950, CSA-C22.2 No. 60950-00 ### 开关模式 - Power One - 300W 至 1000W 机架安装前端
    4424
    1+
    5113.7251
    10+
    5067.2367
    25+
    5043.9925
    50+
    5020.7483
    100+
    4997.5041
    150+
    4974.2599
    250+
    4951.0157
    500+
    4927.7715
  • 品类: 开关电源
    描述: MPB125/150 系列 MPB125 和 MPB150 系列是单、双输出交流到直流电源,提供高效率、高功率密度和有源功率因数校正 (PFC)。适用于网络、数据通信、商业和工业应用。 这些单输出型号提供完全调节输出、额定对流和强制空气冷却。 提供满输出功率,可以提供每分钟低至 5 立方英尺 (CFM) 的强制空气冷却功率。 高功率密度,采用工业标准尺寸 3" x 5" 功率因数校正 (PFC) 符合 EN61000-3-2 标准 CE 标志符合低电压指令(待审批) 输入瞬时和 ESD 符合 EN61000-4-2/-3/-4/-5 标准 ### 开关模式 - Power One
    9259
    1+
    1265.8701
    10+
    1254.3622
    25+
    1248.6082
    50+
    1242.8543
    100+
    1237.1003
    150+
    1231.3464
    250+
    1225.5924
    500+
    1219.8385
  • 品类: 开关电源
    描述: Power One 200W Switch Mode AC-DC Power Supply - ABC200-10XXG Series ABC200-10XXG series 200W switch mode embedded AC-DC power supplies with a compact design and universal AC voltage input range. These 200W switch mode AC-DC power supplies have a high power density and incorporate boundary conduction mode PFC converter and soft-switching LLC converter resulting in increased system reliability and efficiency of up to 91%. Typical applications for these 200W switch mode AC-DC power supplies include telecommunication, datacommunication and industrial equipment. Universal AC input voltage of 90 to 264 Vac Active power factor correction Power Good signal High power density of 15 W/in3 High efficiency of up to 91% Over temperature, output voltage, over current and short ciruit protection Compact size: 2.0 (W) x 4.0 (L) x 1.5 (H) inches EMC compliance: Class A, EN55022 Harmonic Emissions: Class A: IEC61000-3-2 ### 注 Derate power above 50°C ### 认可 CSA ### 标准 UL 60950-1 Second Edition, CSA-C22.2 No. 60950-1-03 Second Edition, IEC 60950-1:2005, EN 60950-1:2006, CE Mark for LVD, CB Approval ### Switch Mode - Power One - 30W to 400W High Power Density, Open Frame
    8619
    1+
    1612.6946
    10+
    1598.0337
    25+
    1590.7033
    50+
    1583.3729
    100+
    1576.0425
    150+
    1568.7120
    250+
    1561.3816
    500+
    1554.0512
  • 品类: 开关电源
    描述: 50 W 单/双输出,M 系列 M 系列直流 - 直流和交流 - 直流转换器代表广泛且灵活的电源范围,用于高级工业电子系统。 这种欧洲盒式电源由于每个输出具有单独的调节,因此具有高效率、可靠性、低输出电压噪声和对负载/线路变化的出色动态响应功能。 LED 指示器显示该转换器的状态,并允许随时对系统进行可视监控。 盒式设计,允许在大气环境温度高达 71°C 时,以额定负载运行。 如果提供强制冷却,则环境温度可以超过 71°C,但所有情况下外壳温度应保持低于 95°C。 当外壳温度 TC 超过限制时,温度传感器将生成抑制信号,该信号会终止输出。 温度降至限制以下时,输出将自动恢复。 根据 IEC 60927-3,转换器可插入 19 英寸的子架系统,或安装到地盘或板子上。 工作输入电压范围极广,8 至 385 V 直流和 85 至 264 V 交流,47 至 440 Hz 符合 RoHS 无铅焊接 I 类设备 输入过压和欠压闭锁 1、2 或 3 单独隔离,控制输出高达 96 V 输出:SELV,空载、过载、短路保护,矩形电流限制特性 可使用远程开/关调节输出电压 抗干扰性符合 IEC/EN 61000-4-2、-3、-4、-5、-6-6 辐射符合 EN 55011/55022 所有印刷电路板均有保护漆涂层 超高可靠性 提供电池充电器型号 ### 标准 EN 60950-1, UL 60950-1 铁路 EN 50155,EN 50121
    2613
  • 品类: 开关电源
    描述: 1800W, Universal Input, Rack mount Front Ends These front end power supplies have a wide input voltage range and use an IC2 managemnt interface for fan speed control, output voltage adjustment, output current limit setting and remote monitoring of power supply alarms and status indication. A highly efficient thermal design with internal-fan cooling permits use over wide termperature ranges and provides high reliability. The small dimensions of this power supply allow configuration of up to 3 units in a 1 U rack (up to 4500 W). These power supplies have AC and DC connections at the rear, provide for true hot-swap and can be used for redundant system applications. Mounting and interconnection of these power supplies is made easy through the use of FXR-3 racks (see stock numbers 713-3706 (for FXP1500-32G) and 713-3693 (for FXP1800-48G) Wide input voltage range 85-264 Vac Active current/load sharing Power factor corrected (PFC) IC2 interface for status monitoring, power supply enable, fan speed control Remote monitoring of power supply alarms with LED indication of AC Power-fail, DC output fail, over-temperature and fan-fail Adjustable output voltage: FXP1500-32G can be adjusted from 28-36 Vdc, FXP1800-48G can be adjusted from 44.2-51.8 Vdc High power density design Highly efficient topology Power factor correction to EN 61000-3-2 EMC meets EN 55022/CISPR 22 Class B (conducted) and Class A (radiated) Over-temperature, output over-voltage, and output over-current protection O-Ring circuit for true redundant operation Internal fan cooling Meets international safety standards and displays the CE-Mark for the European Low Voltage Directive (LVD) Subassemblies are pre-tested with 4.2 kVdc in accordance with EN50116 and IEC/EN60950 ### 注 For output mating connector see stock number 562-814,For interface adaptor see stock number 256-200,For power shelves see 713-3706 (for FXP1500-32G) and 713-3693 (for FXP1800-48G) ### 认可 TUV, CSA, UL, cUL ### 标准 EN 60950-1, UL 60950, CSA 60950 ### 开关模式 - Power One - 300W 至 1000W 机架安装前端
    4809
    1+
    5208.0853
    10+
    5160.7391
    25+
    5137.0660
    50+
    5113.3928
    100+
    5089.7197
    150+
    5066.0466
    250+
    5042.3735
    500+
    5018.7004
  • 品类: 开关电源
    描述: MAP80 系列 MAP80 系列电源,满足工业和商业要求。 此系列具有可变频率设计,带有具效率的热 U 形通道底盘,可靠和严格调节的直流电源。 单输出型号具有多种可调输出,以满足各种标准和用户指定输出电压要求。 全面的国际安全、符合 EMI 和 ESD,可确保全球合格标准。单独提供用于 MAP80 系列的盖。 双模式连接器 所有装置均带有 CE 标志 ### 开关模式 - Power One
    3129
  • 品类: 开关电源
    描述: MAP55 系列 MAP55 系列电源,满足工业和商业要求。 此系列具有可变频率设计,带有具效率的热 U 形通道底盘,可靠和严格调节的直流电源。 单输出型号具有多种可调输出,以满足各种标准和用户指定输出电压要求。 全面的国际安全、符合 EMI 和 ESD,可确保全球合格标准。 单独提供用于 MAP55 系列的盖。 公制和 SAE 安装插件 双模式连接器 所有装置均带有 CE 标志 ### 开关模式 - Power One
    7438
  • 品类: 开关电源
    描述: MAP55 系列 MAP55 系列电源,满足工业和商业要求。 此系列具有可变频率设计,带有具效率的热 U 形通道底盘,可靠和严格调节的直流电源。 单输出型号具有多种可调输出,以满足各种标准和用户指定输出电压要求。 全面的国际安全、符合 EMI 和 ESD,可确保全球合格标准。 单独提供用于 MAP55 系列的盖。 公制和 SAE 安装插件 双模式连接器 所有装置均带有 CE 标志 ### 开关模式 - Power One
    8680
  • 品类: 开关电源
    描述: MAP110 系列 MAP110 系列为低成本电源,满足工业和商业要求。 宽动态输出电流和固定频率操作可简化系统级别操作。 单输出型号具有多种可调输出,以满足各种标准和用户指定输出电压要求。 符合 EMI 和 ESD,可确保全球合格标准。 ### 认可 EN60950-1 ### 开关模式 - Power One
    3747
  • 品类: 开关电源
    描述: MAP30/40/42 系列 MAP30/40/42 系列电源,满足工业和商业要求。 这些电源在仅限电源的解决方案中将低成本和通用输入相结合。 全面的国际安全、符合 EMI 和 ESD,可确保全球合格标准。 国际标准 3.00 x 5.00 引脚区域、单输出型号具有各种可调输出,可满足各种标准和用户指定输出电压要求。 ### 认可 EN60950-1 ### 开关模式 - Power One
    1734
  • 品类: 开关电源
    描述: MAP55 系列 MAP55 系列电源,满足工业和商业要求。 此系列具有可变频率设计,带有具效率的热 U 形通道底盘,可靠和严格调节的直流电源。 单输出型号具有多种可调输出,以满足各种标准和用户指定输出电压要求。 全面的国际安全、符合 EMI 和 ESD,可确保全球合格标准。 单独提供用于 MAP55 系列的盖。 公制和 SAE 安装插件 双模式连接器 所有装置均带有 CE 标志 ### 开关模式 - Power One
    2315
    1+
    3842.3770
    10+
    3807.4463
    25+
    3789.9810
    50+
    3772.5156
    100+
    3755.0503
    150+
    3737.5849
    250+
    3720.1196
    500+
    3702.6542
  • 品类: 开关电源
    描述: MAP55 系列 MAP55 系列电源,满足工业和商业要求。 此系列具有可变频率设计,带有具效率的热 U 形通道底盘,可靠和严格调节的直流电源。 单输出型号具有多种可调输出,以满足各种标准和用户指定输出电压要求。 全面的国际安全、符合 EMI 和 ESD,可确保全球合格标准。 单独提供用于 MAP55 系列的盖。 公制和 SAE 安装插件 双模式连接器 所有装置均带有 CE 标志 ### 开关模式 - Power One
    7294
    1+
    1486.0120
    10+
    1472.5028
    25+
    1465.7482
    50+
    1458.9936
    100+
    1452.2390
    150+
    1445.4844
    250+
    1438.7298
    500+
    1431.9752

©Copyright 2013-2025 亿配芯城(深圳)电子科技有限公司 粤ICP备17008354号

Scroll

对比栏

展开

对比

清空